Cunningham's Marine
Mercury Outboards >> Seapro >> 75 HP
 
SaltWater seapro 75 HP
 
 STANDARD FEATURES
 
For operator peace of mind, the gearcase has dual water pick-ups. In the event the primary inlet becomes plugged, the secondary inlet is activated and allows cooling water to continue flowing through the engine.
Finger adjustable steering co-pilot is conveniently located between the clamp brackets for easy use.
Propshaft, shiftshaft, driveshaft, fasteners, and water pump housing are stainless steel for added strength and corrosion resistance.
18 amp/254 watt charging capacity will power a host of accessories.

Modular CD ignition system provides precision ignition timing for better performance and superior operation at all running speeds.
Loop-charged induction maximizes the air/fuel mixture for impressive response, performance, and fuel economy.
 
 SPECIFICATIONS
 
Propshaft Rated Horsepower: 75 HP
Max RPM at Full Throttle:
4750 - 5250
Cylinders:
3
Displacement:
84.6 cu in. (1386cc)
Bore & Stroke:
89mm x 75mm
Cooling System:
Water cooled with thermostat and pressure controlled
Ignition:
Modular CDI
Starting:
Manual or Electric
Gear Ratio:
2.30.1
Gear Shift:
F-N-R
Steering:
Tiller
Alternator System: 18 amp (254 watt)
Trim Positions: Gas assist
Fuel Tank:
Separate 6.6 US gal (25 litres)
Weight:
305 lb (139kg)
Propeller Drive:
Splined rubber hub
Recommended Boat Transom Height:
Short 381mm, Long 508mm, X-long 571mm
Propeller Option:
See Dealer
Prop Selection (Pitch):
10" - 26"
Induction System:
Loop-charged (3 carb)
Oil Injection:
Standard
Counter Rotation:
N/A
SmartCraft Capabilities:
N/A
 
Contact Details :
51 – 59 Snook St (service rd) , Elizabeth Avenue , Clontarf QLD 4019

Tel:
(07) 3284-2342 | Fax: (07) 3284-9155 | Email: info@cunninghamsmarine.com.au
Mon - Fri: 8:00am - 5:15pm | Sat: 8:00am - 4:00pm