MerCruiser >> Jet >> 5.0L MPI Petrol |
|
| |
| Mercury MerCruiser Jet packages deliver outstanding performance, reliability, high efficiency and superior manoeuvrability. Inside and out, MerCruiser Jet puts the latest technology to work for you. |
| |
| FEATURES AND BENEFITS |
| |
 Easy to Maintain
Fewer moving parts
Simple sealing arrangement
Engine Loading Independent of Boat Speed
Reduces chances of engine overloading
Oil Lubricated Rear Bearings
Jet can be test started or run on hardstand during maintenance |
Designed Specifically for MerCruiser Engines
True matching of jet, engine and gearbox
High Volume 250mm diameter (10 in.) Axial Flow Pump
High thrust with enhanced load carrying capacity and good acceleration
Water Cooled Transmission
Increases lubricant life
Reduces service intervals |
|
 |
|
| Impeller Shaft Rated Power: 260hp |
Idle RPM: 600 (ECM 555 Controlled) |
Jackshaft: Kit |
| SmartCraft: Yes |
Full Throttle RPM: 5000 |
MerCathode: Kit |
| Displacement (litre/CDI): 5.0L/305 |
Alternator (amps): 65 |
Exhaust Risers: 3 in. & 6 in. Optional |
| Cylinders: v-8 |
Audio Warning System: STD |
Platinum-Tipped Spark Plugs: STD |
| Bore & Stroke (inches): 3.74/3.48 |
Engine Protection System:Engine Guardian |
Remote Oil Filter: STD |
| Compression Ratio: 9.4:1 |
Closed Cooling System: Opt |
Seawater Pump Material: Brass |
| Ignition Type: ECM 555 |
Easy Engine Oil Drain System: STD |
Water Cooled Fuel System: STD |
| Fuel System: MPI |
Engine Flush Port: - |
Water/Fuel Separation Filter: STD |
|
| Pump Type: Axial Flow, High volume |
Trimable Nozzle: Optional |
Engine Mounting System: Integrated |
| Impeller Diameter: 10 in./250mm |
Intake System: High Flow, Grill Protected |
Exhaust System: (not incl.)Through Transom, Wet...Box & Inline Muffler |
| Impeller: 6 Blade,Progressive Pitch, Stain/S |
Gear Ratio: 1.60:1 |
F-N-R Thrust: (with full thrust) Twin-aperture Reverse Bucket |
| Trim System: Adjustable Trim Plate |
Power Take-Off: STD |
|
|
| Length: transom to front engine: 1180mm |
Width: water jet overall @: 460mm...reverse bucket |
Recess: max. allowable, transom: 350mm...back of boarding platform |
| Length: transom to rear jet: 873mm |
Height: bottom of jet unit to: 860mm...top of engine |
Weight: total package: 467kgs |
| Width: engine overall: 742mm |
Height: bottom of jet unit to top of: 493mm...reverse bucket in forward gear |
|
|
|
| Contact Details : |
51 – 59 Snook St (service rd) , Elizabeth Avenue , Clontarf QLD 4019
Tel: (07) 3284-2342 | Fax: (07) 3284-9155 | Email: info@cunninghamsmarine.com.au
Mon - Fri: 8:00am - 5:15pm | Sat: 8:00am - 4:00pm |
|
