Cunningham's Marine
MerCruiser >> Jet >>  2.8 EJ 200 Diesel
 
Mercury MerCruiser Jet packages deliver outstanding performance, reliability, high efficiency and superior manoeuvrability. Inside and out, MerCruiser Jet puts the latest technology to work for you.
 
Ally Craft Cuddy Cabins 5.10 Premier
 
 
FEATURES AND BENEFITS
 
Easy to Maintain
Fewer moving parts
Simple sealing arrangement
Engine Loading Independent of Boat Speed
Reduces chances of engine overloading
Oil Lubricated Rear Bearings
Jet can be test started or run on hardstand during maintenance
Designed Specifically for MerCruiser Engines
True matching of jet, engine and gearbox
High Volume 250mm diameter (10 in.) Axial Flow Pump
High thrust with enhanced load carrying capacity and good acceleration
Water Cooled Transmission

Increases lubricant life
Reduces service intervals
 
ENGINE  SPECIFICATIONS
 
Impeller Shaft Rated Power: 200hp Idle RPM: 600 (ECM Controlled) Jackshaft: Kit
SmartCraft: No Full Throttle RPM: 3800 MerCathode: STD
Displacement (litre/CDI): 2.8L/169 Alternator (amps): 80 Exhaust Risers: 5 in. STD
Cylinders: Inline-4 Audio Warning System: STD Platinum-Tipped Spark Plugs: -
Bore & Stroke (inches): 3.70/3.94 Engine Protection System:Engine Guardian Remote Oil Filter: n/a
Compression Ratio: 16.5:1 Closed Cooling System: STD Seawater Pump Material: Brass
Ignition Type: Bosch Mechanical Easy Engine Oil Drain System: - Water Cooled Fuel System: -
Fuel System: Direct-Injected Engine Flush Port: - Water/Fuel Separation Filter: STD
 
PUMP  SPECIFICATIONS
 
Pump Type: Axial Flow, High volume Trimable Nozzle: Optional Engine Mounting System: Integrated
Impeller Diameter: 10 in./250mm Intake System: High Flow, Grill Protected Exhaust System: (not incl.)Through Transom, Wet...Box & Inline Muffler
Impeller: 6 Blade,Progressive Pitch, Stain/S Gear Ratio: 1.47:1 F-N-R Thrust: (with full thrust)Twin-aperture Reverse Bucket
Trim System: Adjustable Trim Plate Power Take-Off: STD  
 
PACKAGE  SPECIFICATIONS
 
Length: transom to front engine: 1271mm Width: water jet overall @: 460mm...reverse bucket Recess: max. allowable, transom: 350mm...back of boarding platform
Length: transom to rear jet: 873mm Height: bottom of jet unit to: 850mm...top of engine Weight: total package: 491kgs
Width: engine overall: 740mm Height: bottom of jet unit to top of: 493mm...reverse bucket in forward gear  
Contact Details :
51 – 59 Snook St (service rd) , Elizabeth Avenue , Clontarf QLD 4019

Tel:
(07) 3284-2342 | Fax: (07) 3284-9155 | Email: info@cunninghamsmarine.com.au
Mon - Fri: 8:00am - 5:15pm | Sat: 8:00am - 4:00pm