Cunningham's Marine
Mariner Outboards >> Mariner Verado >> 300 HP EFI
 
Mariner Verado 200 HP
 
 STANDARD FEATURES
 
Supercharged, intercooled induction system with PCM 07-controlled electronic boost valve.
Patented supercharger air induction system with highly tuned intake resonator delivers an intake sound reduction of up to 14dBA in the mid-range to full throttle without sacrificing engine performance.
In-line 6-cylinder engine platform.
Direct-acting 24-valve double overhead cam (DOHC).
SmartCraft DTS electronic throttle & shift.
Oil jet piston cooling system.
Thermally isolated oil sump with exclusive thermostatically controlled oil cooling module.

Isolated engine cowling system
High-performance AMS (Advanced MidSection) progressive rate perimeter mount system.
SmartCraft-programmable 2-speed power trim and tilt.
Standard electro-hydraulic power steering.
Integral electro-hydraulic power steering cylinder.

 
 SPECIFICATIONS
 
Propshaft Rated Horsepower: 300hp (223kw)
Max RPM at Full Throttle:
5800-6400
Cylinders/Engine Configuration:
In-line 6 cylinder, 24-valve, direct acting double overhead cam (DOHC)
Displacement:
158.5 cu in. (2.6lt) (2598cc)
Bore & Stroke:
82mm x 82mm (3.23" x 3.23")
Induction System:
SmartCraft DTS electronic throttle, supercharged with charge air cooling & electronic boost pressure control
Fuel System: Computer-controlled sequential multiport Electronic Fuel Injection (EFI)
Fuel Requirements:
Unleaded premium 91-octane
Ignition System:
SmartCraft PCM 07 digital inductive
Charging System:
Fully regulated belt-driven 70-amp (882-watt)
Starting:
SmartStart Electric (turn-key)
Exhaust System: Through prop
Cooling System: Water-cooled with thermostat & pressure control
Lubrication System: Integrated dry sump
Oil Requirement:
NMMA certified FCW SAE 25W-50
Oil Capacity:
8.0 litres
Engine-Management System:
SmartCraft PCM 07
Engine Control System:
SmartCraft Digital Throttle & Shift (DTS)
Engine Protection System:
SmartCraft Engine Guardian
Gear Shift:
SmartCraft DTS, F-N-R
Gear Ratio:
1.75:1
Driveshaft Lengths:
20"(L); 25"(XL,CXL); 30" (XXL, CXXL)
Counter-rotation: Available on 20" (L); 25" (CXL) & 30" (CXXL) models
Trim/Tilt System: SmartCraft- programmable power trim and tilt
Maximum Tilt Range 73o (-6o to 67o )
Maximum Trim Range 20o (-6o to 14o )
Steering System: Electro-hydraulic power steering with integral hydraulic cylinder
Comparative Weight:
20" (L)
288kg (635lbs)
25" (XL, CXL) 294kg (649lbs)
30" (XXL, CXXL) 302kg (667lbs)
 
Contact Details :
51 – 59 Snook St (service rd) , Elizabeth Avenue , Clontarf QLD 4019

Tel:
(07) 3284-2342 | Fax: (07) 3284-9155 | Email: info@cunninghamsmarine.com.au
Mon - Fri: 8:00am - 5:15pm | Sat: 8:00am - 4:00pm