Cunningham's Marine
Mariner Outboards >> Verado >> 225 HP EFI
 
Mariner Verado 225 HP
 
 STANDARD FEATURES
 
Supercharged, intercooled induction system with PCM 03-controlled electronic boost valve.
Patented supercharger air induction system with highly tuned intake resonator delivers an intake sound reduction of up to 14dBA in the mid-range to full throttle without sacrificing engine performance.
In-line 6-cylinder engine platform.
Direct-acting 24-valve double overhead cam (DOHC).
Standard SmartCraft DTS (Digital Throttle & Shift)
Oil jet piston cooling system
Thermally isolated oil sump with exclusive thermostatically controlled oil cooling module
Isolated engine cowling system

High-performance AMS (Advanced MidSection) progressive rate perimeter mount system.
SmartCraft-programmable 2-speed power trim and tilt.
Standard electro-hydraulic power steering
Integral electro-hydraulic power steering cylinder

 
 SPECIFICATIONS
 
Propshaft Rated Horsepower: 225hp (168kw)
Max RPM at Full Throttle:
5800-6400
Cylinders:
Straight-6, 24-valve, direct-acting double overhead cam (DOHC)
Displacement:
158.5 cu in. (2.6L) (2598cc)
Bore & Stroke:
3.23" x 3.23" (82mm x 82mm)
Induction System:
SmartCraft DTS Electronic throttle, supercharged with charge air cooling and electronic boost pressure control
Fuel System:
Computer-controlled sequential multiport Electronic Fuel Injection (EFI)
Fuel Requirements:
Unleaded regular 87-octane minimum (R+M/2)
Ignition System:
SmartCraft PCM 03 digital inductive
Charging System:
Fully regulated belt-driven 70-amp (882 watt)
Starting:
Electric (turn-key)
Exhaust System:
Through prop
Cooling System: Water-cooled with thermostat & pressure control
Lubrication System: Integrated dry sump
Oil Requirement:
NMMA - certified FCW SAE 25W-40
Oil Capacity:
8.5qt (8.0L)
Engine-Management System:
SmartCraft PCM 03
Engine Control System:
SmartCraft Digital Throttle & Shift (DTS)
Engine Protection System:
SmartCraft Engine Guardian
Gear Shift:
SmartCraft DTS, F-N-R
Gear Ratio:
1.85:1
Driveshaft Lengths:
20" (L), 25" (XL, CXL), 30" (XXL, CXXL)
Counter-rotation: Available on 25" (CXL); & 30" (CXXL) models
Trim/Tilt System: SmartCraft-programmable power trim and tilt
(as measured on a 14 degree transom) 73 degree (-6 to 67 degree), 20 degree (-6 to 14 degree)
Steering System: Electro-hydraulic power steering with integral hydraulic cylinder
Comparative Weight: 20"(L) 635lb 288kg; 25"(XL,CXL) 649lb 294kg; 30" (CXXL) 667lb 302kg
 
Contact Details :
51 – 59 Snook St (service rd) , Elizabeth Avenue , Clontarf QLD 4019

Tel:
(07) 3284-2342 | Fax: (07) 3284-9155 | Email: info@cunninghamsmarine.com.au
Mon - Fri: 8:00am - 5:15pm | Sat: 8:00am - 4:00pm